Rhyno Mop head

Rhyno Mop head

Silky Finish Mop - Large

Silky Finish Mop - Large

Dirtbuster Mop head

GOOD VALUE WASH MOP
Ideal for floor washing this mop has four rows of precision stitching on a corrosion resistant mesh band.

From: $4.24 To: $4.98

Availability: In stock
SKU
1124-
Select Size Stock SKU Unit Price
Medium
In Stock
1120
$4.24
Large
In Stock
1124
$4.98
Total
Great solution for
Constructed of cotton fibre, the Dirtbuster picks up 2-3 times its weight in water providing great absorption.
The cotton fibre construction makes it ideal for washing and an economical choice as generally cotton is the lowest cost mop head.
Over time, there is possibility, the cut ends can be subject to fraying or unraveling and may leave lint and loose strands behind.
Laundering is not recommended so depending on soil, the life of the mop may be limited.
Break-in prior to use is necessary. Immerse mop in a mop bucket filled with diluted neutral floor cleaner solution and a water temperature of 49 o C - 60 o C (120 o F - 140 o F).
Overall the Dirtbuster mop head is an economical, low cost tool that will provide a great absorbing mop.
Product Tips
1
Always hang your mop up in a tool holder to help prevent marks and damage to walls.
2
Rinse and wring out mop after each use and hang in a well-ventilated area to air dry and help prevent mildew.
3
Discard and replace worn mop heads to reduce cleaning time.
4
To prevent snagging of strings or splattering, cut loose strands.
5
Strong cleaning solutions (bleach, caustics, etc) can be break strands shortening the life of your mop.
6
Cutting-in will eliminate splashing walls and baseboards which will have to wiped by hand, an extra step.
7
Use both sides of the mop to use all the solution and clean more evenly and efficiently.
Instructions
Always place wet floor signs in appropriate areas.
Break-in
1. Immerse mop in a mop bucket filled with diluted neutral floor cleaner solution and a
water temperature of 49 o C - 60 o C (120 o F - 140 o F).
2. Agitate and wait approx. 5 seconds to ensure all fibres have absorbed the solution.
3. Wring mop, rinse and repeat.
4. Repeat if necessary ensuring all fibres are wet.
5. Dispose of solution and obtain fresh for cleaning.
Cutting-in
1. Always mop floor edges and corners keeping mop parallel to the wall.
2. This controls dirty build-up in corners and along edges.
3. It also eliminates splashing walls and baseboards that will then require hand wiping,
an extra step.
Mopping
1. Always “cut-in” first.
2. Mop floor area using a figure 8 pattern.
3. Be sure to overlap each pass.
4. Keep the heel of the mop to the floor.
5. Use both sides of the mop. To turn over, keep the mop on the floor and gently roll
over to avoid splashing walls and baseboards.
6. Swing mop from side to side using shoulder muscles. Hand and arm muscles will
guide the mop.
Specifications
SKU
1124-
Country of Manufacture
Case Quantity
1
Colour
Beige